fC 17 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches features/benefits ? sealed against solder and cleaning process contaminants ? ul 94v-0 nylon case and bushing ? multi-positions ? esd protection available ? rohs compliant models available typical applications ? telecommunications ? instrumentation ? medical equipment specifications cont act rating: b contact material: 0.4 va max. @ 20 v ac or dc max. q contact material: e1xx & e2xxmodels: 7.5 amps @ 125 v ac or 28 v dc; 3 amps @ 250 v ac. e3xx models: 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. see pagef-25 for additional ratings. electrical life: e1xx and e2xx models: 40,000 make-and-break cycles at full load. e3xx models: 30,000 cycles. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. electrost a tic discharge (esd) option: f1 conductive bushing only . dissipates up to 20,000 v dc fr om actuator to ground. dielectric strength: 1000 vrms min. @ sea level. opera ting tempera ture: C0?oto 85?. solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). degree of protection: ip57; protection against harmful dust deposit, full-scale voltage pr otection, temporary immersion. materials case & bushing: glass filled nylon 6/6, flame r etardant, heat stabilized (ul 94v-0). f1 conductive bushing option is impregnated with carbon fibers. actuator: brass, chrome plated with internal o-ring seal standard. switch support: brass or steel, matte-tin plated. switch support retainer: stainless steel. contacts & terminals: b contact material: copper alloy, with gold plate over nickel plate. q contact material: copper alloy, silver plated. see page f-29 for additional contact materials. terminal seal: epoxy . hardware: nut & locking ring: brass, nickel plated. lockwasher: steel, nickel plated. note: any models supplied with p , s, r, q, b or g contact material ar e rohs compliant and compatible. note : specifications and materials listed above ar e for switches with standard options. for information on specific and custom switches, consult customer service center . build-a-switch t o order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages fC8 thru f?C. for additional options not shown in catalog, consult our customer service center. all models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. switch function e101 sp, on-none-on e103 sp, on-off-on e105 sp, mom.-off-mom. e107 sp, on-off-mom. e108 sp , on-none-mom. e201 dp, on-none-on e203 dp, on-off-on e205 dp , mom.-off-mom. e207 dp , on-off-mom. e208 dp , on-none-mom. e211 dp , on-on-on e213 dp, on-on-mom. e215 dp, mom.-on-mom. e301 3p, on-none-on * f1 available with sp and dp versions only, please see pa ge f-19 actuator m .300" high s .500" high l3 plastic, .940" high terminations a right angle, pc thru-hole av2 vertical right angle, pc thru-hole c pc thru-hole v3 .460" high, v-bracket z solder lug a3 right angle, pc thru-hole av3 vertical right angle, pc thru-hole v6 .460" high, v-bracket v9 1.150" high, v-bracket v31 .460" high, snap-in v-bracket v61 .460" high, sna p-in v -bracket w .750" long, wire wra p z3 quick connect bushing d1 .250" high f1 conductive, .250" high* d9 .280" high y threaded, .350" high contact material b gold p gold, matte-tin q silver s silver, matte-tin g gold over silver r gold over silver, matte-tin seal e epoxy models available
fC 18 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches switch function dpdt 2-1,5-4 2-1,5-4 2-1,5-4 2-1,5-4 n/a open n/a 2-3,5-4 2-3,5-6 2-3,5-6 2-3,5-6 2-3,5-6 on none on on off on mom. off mom. on off mom. on none mom. on on on on on mom. mom. on mom. e201 e203 e205 e207 e208 e211 ** e213 ** e215 ** dp spdt 2-1 2-1 2-1 n/a open n/a 2-3 2-3 2-3 on none on on off on mom. off mom. on off mom. on none mom. e101 e103 e105 e107 e108 sp schematic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles terminal numbers for reference only terminal numbers for refer ence only dpdt spdt part number shown: e101sd1cbe part number shown: e201sd1cbe mom. = momentary all models with all options when ordered with g,r, q or s contact material except with f1 conductive bushing. ** wiring for 3-way switch, see section n. c&k marking on opposite side c&k marking on opposite side
fC 19 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches switch function actuator bushing ? gloss plastic chrome finish * * * 1/4-40 uns-2a p anel mounting 3pdt 2-1,5-4,8-7 n/a 2-3,5-6,8-9 on none on e301 3p schema tic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles c&k marking on opposite side c&k marking on opposite side terminal nos. for refer ence only 3pdt part number shown: e301sd1cbe mom. = momentary all models with all options when or der ed with g, r, q or s contact material except with f1 conductive bushing. ** wiring for 3-way switch, see section n. * actuators shown with standard d1 bushing. subtract .030 (0,76) for d9 bushing. subtract .100 (2,54) for y bushing. standard when ordered with a, a3, av2, av3, v2-v61 terminations. finish: chrome. e3xx models not available with d9 bushing. note: inter nal o-ring actuator seal standard for all bushing options. standard when ordered with c, z, z3, w & w4 terminations. finish: chrome other colors available, consult customer service center . no color choice r equired for s & m actuators. esd pr otection depends on pr oper gr ounding of switch support bracket. f1 conductive bushing option is impr egnated with carbon fibers; dissipates electr ostatic dischar ge (esd) up to 20,000 v from actuator to ground. a vailable with m & s actuator options and a, a3, a v2, av3, v3-v61 termination options. a vailable only with c, z, z3, & w terminations. available for 1&2 pole only. har dwar e: one dr ess nut part number 299d01201, one hex nut part number 540400201 and lockwasher part number 700303202 supplied standard. will withstand 4 in.-lbs. of tor que with no distortion. m .300" high s .500" high l3 plastic, .940" high d1 .250" high, unthreaded f1 esd conductive bushing, .250" high, unthreaded d9 .280" high, unthreaded y threaded, insula ted, .350" high with keyway l3 actuator color option code actuator color actua tor f1 bushing is not ul/csa approved 2 black
fC 20 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches terminations pc mo unting pc mounting actuator shown in pos. 1 section a-a actuator shown in pos. 1 section a-a pc mo unting z solder lug c pc thru-hole a right angle, pc thru-hole a3 right angle, snap-in, pc thru-hole a right angle, pc thru-hole a3 right angle, snap-in, pc thru-hole z3 quick connect spdt thru 3pdt spdt thru 3pdt spdt thru 3pdt e101md1abe horizontal actuation spdt e201md1abe horizontal actuation dpdt not available with f1 conductive bushing or p, r or s contact material. mating quick connector available; order part number 530100000, page f-26. not available with f1 conductive bushing or p , r or s contact material. not available with y bushing. terminal bend radii and lead-in manufacturing option. not available with y bushing. terminal bend radii and lead-in manufacturing option. not available with f1 conductive bushing. t erminal nos. for refer ence only terminal nos. for reference only
fC 21 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches terminations actuator shown in pos. 1 section a-a pc mounting actuator shown in pos. 1 section a-a actuator shown in pos. 1 section a-a pc mounting pc mounting e301md1abe horizontal actuation 3pdt e201md1a v2be v ertical actuation dpdt e101md1av2be vertical actuation spdt not available with y bushing. t erminal bend radii and lead-in manufacturing option. not available with y bushing. t erminal bend radii and lead-in manufacturing option. not available with d9 & y bushings. terminal bend radii and lead-in manufacturing option. terminal nos. for reference only a right angle, pc thru-hole a v2 ver tical right angle, pc thru-hole, .150" pitch a3 vertical right angle, snap-in, pc thru-hole, .150" pitch av2 ver tical right angle, pc thru-hole, .150" pitch av3 ver tical right angle, snap-in, pc thru-hole, .150" pitch
fC 22 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches terminations actuator shown in pos. 1 section a-a pc mounting actuator shown in pos. 1 snap-in pc mounting actuator shown in pos. 1 snap-in pc mounting av2 vertical right angle, pc thru-hole, .150" pitch av3 vertical right angle, snap-in, pc thru-hole .150" pitch v6 ver tical mount , v -bracket v61 vertical mount, v-bracket, snap-in v6 vertical mount, v-bracket v61 ver tical mount, v-bracket, snap-in not available with d9 & y bushings. t erminal bend radii and lead-in manufacturing option. not available with y bushing. not available with y bushing. v6, v61 .460 (11,68) dim option code e301md1av2be vertical actuation 3pdt e201md1__be dpdt e101md1__be spdt v6, v61 .460 (11,68) dim option code
fC 23 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle actuator shown in pos. 1 snap-in pc mounting v9 ver tical mount , v-bracket v9 1.150 (29,21) dim option code e301md1__be 3pdt not available with d9 & y bushings. e series sealed miniature toggle switches terminations actuator shown in pos. 1 snap-in pc mounting actuator shown in pos. 1 snap-in pc mounting v3, v9 vertical mount, v-bracket v31 vertical mount, v-bracket, snap-in v3, v9 vertical mount, v-bracket v31 ver tical mount, v-bracket, snap-in e201md1__be dpdt e101md1__be spdt not available with y bushing. not available with y bushing. v3, v31 .460 (11,68) v9 1.150 (29,21) dim option code v3, v31 .460 (11,68) v9 1.150 (29,21) dim option code
fC 24 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com f toggle e series sealed miniature toggle switches contact material * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. 1 contacts & terminals: copper alloy, with gold plate over nickel plate. 2 end cont acts: coin silver, with gold plate over nickel plate. 3 center cont acts & all terminals: copper alloy, with gold plate over nickel plate. 4 end contacts: coin silver, silver plated. 5 center contact & all terminals: copper alloy, with gold flash over silver plate. or copper alloy, silver plated. 6 terminals: copper alloy , with matte-tin over nickel plate. note: any models supplied with p, s, r, q, b or g contact material are rohs compliant. all models with all options when ordered with s, r, g, or q contact material except with f1 conductive bushing. b contact material standard with all terminations. p , s & r contact materials not available with z & z3 terminations. option code cont act ma terial terminal pla ting ratings silver 5 matte-tin 6 gold 1 silver 4,5 gold over sil ver 2,3 gold 3 ma tte-tin 6 gold 1 matte-tin 6 low level/ dr y circuit power low level/dry circuit or power 0.4 va max. @ 20 v ac or dc max. e1xx & e2xx models: 7.5 amps @ 125 v ac or 28 v dc; 3 amps @ 250 v ac. e3xx models: 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. e1xx and e2xx models: 0.4 va max @20 v ac or dc max. or 7.5 amps @125 v ac or 28 v dc; 3 amps @ 250 v ac. dc e3xx models: 0.4 va max. @ 20 v ac or dc max. or 5 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac. b p q s g r
|
